Performance Characteristics
1. It has good initial adhestion, high bonding speed, strong bonding strength, good film-forming in low temperature, antifreeze, non-aging, solvent-resisting, burning-resisting and not mold
2. Suit for veneering, not foaming after painting.
3. It's environmental, non-toxic and harmless water based adhesive.
Use
This product is hot-press veneer glue suit for veneered furniture, veneer MDF, HDF, plywood and so on, Espencially for mid-thick veneer, manual veneer edge banding and other veneer process requirements.
Technical Parameters
|
Item No.
|
Appearance
|
Viscosity
|
PH
|
Soild content
|
|
Water-based
|
Viscous white liquid
|
25000-35000CPS，25℃
|
5-6
|
45±2%
|
Bonding conditions and effects
Wood moisture content:8-12%
Timber requircments:ensure the wood surface is smooth and clean.
Environmental condictions:generally ont used in damp environment, the below 5℃ or use electric iron to heating it after coating glue and the glue is dry before.
Pot time:within 10 minutes(25℃), the shorter the better, generally before the glue film=forming.
Adhesive strength, after 7 days achieve the strongest bonding strength.
Methods of use
1. Evenly coating the glue on one side, about 100-120g/m², the dosage is according the material and the air relative humidity base on the glue is transfer to the other side without coating easily.
2. Heat for 10-20 seconds with electric iron in 150-170℃, when hot pressing, adjust the pressing time and temperature according the density and the thickness of material.
3. Paste finished, check if there is any bubble or not cement, use the electrie iron reinforce it and paint it after 24H
4. Workshop's temperature below 5℃, bonding immediately after coating.
Storage and transportation
Storage conditions:store in sealed roiginal container in 5℃ at least dry and cool place
Storage life:6 months
Note
1. Do not use mixing with other adhesives.
2. Containers must be cover tightly in order to prevent adhesives surface drying and contamination
